Agriculture is at the cutting edge of innovation and technological progress and we are at the forefront of this revolution with our drone spraying service. Compared to traditional spraying methods, drone spraying offers significant advantages that are not only economical, but also ecologically superior.
Drone spraying completely eliminates the trampling damage that can occur with conventional ground spraying, avoiding yield losses of up to 10-15%. This improves crop health and increases yields, directly increasing farmers' profitability.
Spraying with drones is not only faster and more precise, but also more cost-effective in the long run. Using fewer chemicals and working faster reduces operating costs. In addition, drones can also reach areas that are difficult to access or have uneven terrain, where working with conventional tools would be particularly expensive.
Spraying with drones not only increases the efficiency of agricultural production, but also reduces its impact on the environment. Targeted spraying means fewer chemicals are released into the soil and water basins, reducing the environmental footprint. The use of precision technology minimises the amount of chemicals that end up in unwanted areas, thus protecting biodiversity and promoting more sustainable agricultural practices. Drone spraying is therefore not just a new technology, but a step towards sustainable and responsible agriculture. We are committed to using the latest technologies and methods for the benefit of our customers and the environment.
Drone spraying is extremely precise. Thanks to modern GPS and remote sensing technologies, drones can distribute pesticides exactly where they are needed, with centimetre-level accuracy. This precision spraying reduces the need for excessive use of chemicals to control pests, diseases and weeds. Furthermore, drone technology allows large areas to be treated quickly and efficiently, minimising the time and effort that would be required with traditional methods. This saves farmers time and money, allowing them to focus on other important activities.
Technology and expertise are key to meeting the challenges of agricultural production and maximising yields. That's why we offer a full range of innovative drone spraying solutions, based on the latest technological advances and in-depth knowledge of agriculture.
Our drone spraying service covers all stages, from the preliminary survey to the completion of the spraying work. Our service is based on the following processes:
1. Survey of the area:Our modern drones are able to provide an accurate topographical survey of the area, which forms the basis for the development of a spraying plan. This phase allows us to precisely identify the areas to be treated and optimise the quantity of chemicals needed.
2. Customised spraying plans:Each type of plant and area requires individual treatment. Our customised spraying plans take into account the specific characteristics of the plants, the soil conditions and the site to ensure the best possible protection and yield.
3. Data-based decision support:We use the power of data to maximise spraying efficiency and crop yields.
4. The latest plant conservation strategies:We keep up to date with the latest research and technology for crop protection, to ensure our customers have the most modern solutions to protect their crops.
5. Integrated pest management:We work closely with our customers to develop comprehensive crop protection strategies that include pest management and disease prevention, minimising the need for chemical controls.
6. Optimised spraying:Detailed analysis of data collected by drones allows us to identify the exact areas to be treated, optimise the use of chemicals and increase yields. We have seen and experimented with many of our customers how our drone spraying technologies and data-driven decision support solutions have improved agricultural productivity and yields. Our services are centred on helping our customers maximise their agricultural production with cutting-edge technological solutions.
The cost of investing in drone spraying technology is very high. It is not enough to buy a drone to be able to spray. Purchasing a drone requires the necessary software and other additional equipment to control it. In addition, it is necessary to train pilots to fly the drone. This training is not just a financial investment, but a learning process that takes several months. And then you can start flying. To become a good agricultural drone pilot, you need to practice and fly a lot. We have taken these courses, we have the right experience flying agricultural drones and we have all the technology needed to pilot a drone. So there's no need to worry about any of that. We can provide you with a service that will allow you to market your agricultural products at market prices and keep your cost prices low. This will increase your profits. We use drones for spraying DJI AGRAS T50
Cutting-edge technology:Our commitment to quality and innovation: we always use the latest drone and spraying technologies to guarantee the best possible results for our customers.
Customised solutions:We treat each project as a unique challenge, offering customised solutions that are tailored exactly to our customers' needs.
Efficient use of chemicals:Our targeted spraying techniques use fewer chemicals, reducing environmental impact and costs.
Safety:Safety is always our top priority and we take all necessary measures to ensure that our operations meet the highest safety standards.
Reliability:We have a team of professional and well-trained experts who are committed to providing excellent service.
Personalised assistance:We provide all our customers with personalised assistance and advice to achieve the best results.
With our drone spraying service, we offer a number of advantages that can significantly improve the efficiency and effectiveness of your agricultural operations. Here are some of the main advantages offered by our technology.
Cost efficiencyDrone spraying can significantly reduce your spraying costs. Precise application technology means that less pesticide is needed, as drones are able to spray precisely in designated areas, reducing unnecessary use. This not only results in a reduction in chemical costs, but also a reduction in environmental impact. Furthermore, using drone spraying can minimise trampling damage, which means further savings on production costs and, in the long term, can increase yields.
Time savingDrone technology offers a fast and efficient solution for spraying. Compared to traditional methods of spraying on the ground or by hand, drones can cover large areas in a short time, saving farmers time. Pre-programmed routes and high flight speed allow for less time and human effort, leaving more time for other important agricultural activities.
Precise and efficientOur drone spraying uses the most advanced technology to ensure the most accurate and effective application possible. Thanks to our RTK (Real Time Kinematic) navigation system, the drones are able to survey the area with centimetre accuracy and distribute the spray exactly where it is needed. This not only optimises the use of chemicals, but also reduces the environmental impact. The spot treatment option allows you to spray only where it is needed, further improving efficiency and effectiveness.
Easy management of wet and muddy areasA common problem in agricultural areas is silting caused by inland waters, which can make spraying with traditional machinery very difficult. Drone spraying technology can easily overcome this obstacle. By flying above the ground, drones can carry out the necessary spraying without problems and without being influenced by the conditions of the terrain. This allows for accurate and effective spraying even in areas where water and mud would make it impossible for other tools. This means that plant protection can be guaranteed at all times, regardless of the temporary difficulties of the area.
Accessible access to steep slopesThe challenges posed by steep slopes or obstacles in the terrain also often make agricultural work difficult, particularly spraying. However, drones can easily access these areas because, thanks to their flight capability, they are not dependent on the terrain below. This means that even on steep slopes or in difficult-to-reach hilly areas, it is possible to ensure accurate and uniform spraying, which was previously a difficult and time-consuming task. Spraying with drones also allows for the uniform distribution of crop protection in these special areas, helping to optimise crop yield and provide effective protection against plant diseases and pests.
Drone spraying Our servicesOur services include drone spraying of fields, orchards and vineyards. Drone spraying technology allows for the effective spraying of hard-to-reach areas, ensuring that all crops receive the protection they need. This method offers significant advantages over traditional spraying techniques, including speed, precision and reduced environmental impact. Our drones can work with precision in the most difficult to reach areas, minimising the use of water and chemicals and damage from trampling.
Precision deliveryWe use RTK (Real Time Kinematic) technology to ensure the highest possible precision in mapping and application. This system is able to navigate with centimetre accuracy, ensuring that the spray is delivered exactly where it is most needed. Precision application reduces the use of chemicals and increases yield, minimising environmental impact.
Granule and seed dispersalOur special service is the spreading of granules and seeds in hard-to-reach areas. The granule spreading system of our drones allows for a uniformly distributed application, ensuring efficient seeding of cover crops and green manure. This technology is particularly advantageous in hilly areas with obstacles where conventional methods are difficult to apply.
Environmentally friendly solutionsPrecision application technology allows you to achieve the desired effect using fewer chemicals, reducing soil and water pollution.
High performance per hectareFor the most urgent tasks, we provide high performance in terms of hectares by deploying multiple drones simultaneously. This approach is particularly useful on larger farms or when rapid intervention is required. Using multiple drones together significantly reduces the time needed for the job, so that spraying can be carried out quickly and efficiently.
Our crop protection services with drones are designed to adapt perfectly to the specific needs of our customers and the particularities of their projects. We are aware that each agricultural area is unique and therefore the complexity of the tasks to be faced and the need for interventions to be carried out may vary. For this reason, we have adapted our prices according to individual projects, but below we have provided some general price ranges for information purposes, so that our customers can plan their budget in advance.
The prices for crop protection treatments on arable land vary according to the size of the area to be treated, the complexity of the treatments required and the type of protection products to be used. The price range indicated is a general guideline that can cover the cost of normal spraying operations.
Spraying orchards and vineyards is usually more demanding, as these areas are more difficult to access and require greater attention due to the specific needs of the plants. Prices are therefore higher, but the final amount may vary depending on the size of the area to be treated, the plant varieties and specific needs.
It is important to emphasise that the prices listed above are purely indicative. Each project is unique and a number of factors can influence the final price, including the size of the area, the complexity of the work to be carried out and the type and quantity of control products used. For an accurate, project-specific quote, please contact us. Our team of experts is ready to discuss your needs with a detailed consultation and develop the best control strategy and cost plan for you.Renting our drone spraying service follows a simple and transparent process that ensures all projects are completed smoothly and efficiently. Here is the step-by-step service process:
All you have to do is fill in the MODULE online on our website. In this form you can provide basic information about your project and your contact details. What happens next? Once we have received your details, we will process them quickly and contact you shortly. Our aim is to understand exactly what you need and provide you with personalised information about possible next steps.
Place an order. During the conversation after you contact us, if you decide you would like to take advantage of our services, we will record your order. At this stage we will specify the details of the service, including the spraying date and specific requirements.
After placing your order, we will arrive at the agreed time and carry out a drone survey of the area. This includes clarifying the boundaries of the area and any obstacles or difficulties.
We will prepare a detailed spraying plan that will illustrate how the spraying will be carried out, including the necessary materials and the exact application programme.
Based on the inspection and planning, we carry out the spraying with drones as agreed. We work with the utmost care and precision to ensure optimal application of the materials to be sprayed. Results: our goal is to get the best possible results from your spraying operations, contributing to the growth of your farm and optimising your harvests.
If you have any questions or would like more information about our services, please do not hesitate to contact us. Our team of experts is ready to assist you and answer all your questions.We are certain that our services will contribute to the success of your business. We look forward to working with you to develop an effective and environmentally friendly spraying solution.